ClearCube Eon e100 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Pulpit ClearCube Eon e100. ClearCube Eon e100 4 stron. Clearcube eon e100: release note
Również dla ClearCube Eon e100: Dokument techniczny (2 strony), Dokument techniczny (1 strony)

Drukuj stronę
10
9
6
8
7
6
5
4
3
2
1
Note
• The Ethernet connection on
the Neolinux I/Port must be
connected to an active network
before starting the I/Port in
order for the operating system
to turn on the network adapter.
ClearCube Technology
8834 Capital of Texas Hwy N
Quick Start Guide
Eon e100
QSG_E100_final.fm — Enter your TB topic here
CONNECTIONS
1. Power supply connector
2. PS/2 keyboard port
3. PS/2 mouse port
4. Audio line out
5. Audio line in
6. Serial ports
7. Parallel port
The Eon e100 is designed to operate in a vertical position. Install your
Eon e100 in its stand, then connect the power supply, keyboard, mouse,
Ethernet connection, and video to the ports as indicated. To lock the
power supply connector, twist the connector once it's fully seated. Attach
other devices as desired.
To turn on your Eon e100 I/Port, push in the triangular on/off switch on its
11
front panel. To turn it off, push the on/off switch again. You may need to hold
the switch in for 5 seconds, depending upon how your I/Port is configured.
12
Verify connectivity to your network by watching for the flashing green network
activity LED. Enable any necessary ports on your switches and routers. Grid
Center uses port 6500 TCP. RDP uses port 3389 TCP and port 139 UDP.
Your individual network may use other ports besides these.
13
XPe OPERATING SYSTEM
After starting your XPe-based Eon e100, log in to the I/Port. The default
14
administrator ID and password is
default user ID and password is
To log in directly to a Blade with the I/Port client, double-click the IPort
Client Manager icon on the desktop and enter login credentials for the
I/Port. Then log into the Blade using RDP, specifying the domain and
Blade name as follows:
domain.com\blade_name
If you are using your XPE-based Eon e100 as a client managed by Grid
Center, do the following from the Grid Center Console:
1. Discover the I/Port.
2. Configure the I/Port with the Primary and Secondary Consoles' names
to establish them as trusted machines.
3. Add the I/Port to the Grid Center authentication database.
4. Allocate the I/Port to a Blade or a Blade group.
The Grid Center authentication database allows adding and configuring
multiple I/Ports simultaneously. See the Grid Center Administrator's
Guide for more information.
Austin, Texas 78759
8. VGA video port
9. 10/100 BaseT Ethernet port
10. USB 2.0 ports (rear panel)
11. Network activity LED
12. Power LED
13. On/Off switch
14. USB 2.0 ports (front panel)
administrator / clearcube
.
user / clearcube
voice 512 652 3500 www.clearcube.com
. The