Division 6 Dual Mini Sequencer Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Syntezator Division 6 Dual Mini Sequencer. Division 6 Dual Mini Sequencer 14 stron.
Drukuj stronę
to. Hold the two buttons for about 1 second; the note LEDs will flash to let you know when the
copy has been performed.
The copy always goes from the FIRST -> SECOND button you press!
•
You can't copy songs to sequences or sequences to songs
•
Clearing a Song or Sequence
All the songs and sequences in the sequencer always exist, so generally if you want to wipe out
an existing song or sequence you can just modify them or program something new over the top
of them. If you do want to "clear" a memory, however, you can. Clearing a sequence sets all
the steps to the lowest note. Clearing a song sets all the steps to sequence 1.
To do this, first make sure the keyboard display is in SONG/SEQUENCE SELECT mode. Press
and hold the song or sequence you want to clear, then press and hold the RESET button. Hold
the buttons for about 1 second; the note LEDs will flash to let you know that the song or
sequence has been cleared.
Internal Clock
The internal clock works pretty much like before (see v1 section), but more speed choices have
been added and they have been more heavily concentrated in the "useful" range. Also, we
know what actual BPMs the speeds are now!
10 BPM
25 BPM
50 BPM
70 BPM
80 BPM
90 BPM
100 BPM
110 BPM
120 BPM
130 BPM
140 BPM
150 BPM
160 BPM
170 BPM
180 BPM
190 BPM
200 BPM
210 BPM
220 BPM
230 BPM
240 BPM
250 BPM
275 BPM
300 BPM
400 BPM
500 BPM
600 BPM
700 BPM
1000 BPM
2000 BPM
4000 BPM
8000 BPM