3e audio SY-DAP1002 Podręcznik - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik dla Wzmacniacz 3e audio SY-DAP1002. 3e audio SY-DAP1002 15 stron. Tpa32 based dsp integrated portable desktop hifi amplifier
Drukuj stronęSY-DAPx002 UG
Tips
Install this unit in a well ventilated, cool, dry, clean place-away from direct sunlight, heat
sources, vibration, dust, moisture, or cold.
On the top of this unit, do NOT place:
- Other components, as they may cause damage or discoloration on the surface of this unit.
- Combustible (i.e. candles), as they may cause fire, damage to this unit, or personal injury.
- Containers with liquid in them, as they may fall and the liquid may cause electrical shock to
the user or damage to this unit.
Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat
radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, or
personal injury.
Use the voltage specified on this unit Only. Using this unit with a higher voltage than specified
is dangerous and may cause fire, damage to this unit, or personal injury. 3e audio will not be
held responsible for any damage resulting from the use of this unit with a voltage other than
that specified.
Do not attempt to modify or fix this unit by yourself. Contact qualified 3e audio service
personnel when any service is needed. The cabinet should never be opened for any reason.
When not planning to use this unit for long periods of time (i.e. when going on vacation),
disconnect the power cable from the AC wall outlet.
For added protection for this product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to
the product due to lightning and power-line surges.
For any DIY modification please be sure you follow our guide line and be sure not modify any
other sections that don't list here, be aware that any incorrect modification has RISK result in
damage unit, changes or lose in function, the switching mode power supply section is not allow
to any modification!!!
____________________________________________________________________________________________________________
Rev 1.0
2