Clearfield FieldSmart 24 Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Stojaki i stojaki Clearfield FieldSmart 24. Clearfield FieldSmart 24 18 stron. Fiber distribution point (fdp) port outdoor wall box
Drukuj stronęFieldSmart
Fiber Distribution Point (FDP)
®
24 & 48 Port Outdoor Wall Box
Installation Manual
________________________________________________________
Store the slack from the jumpers on the slack management spools provided. (Figure 1)
It is recommended that the jumpers leave the radius spools toward the back wall opposite the cable entrance, and then
transition forward to the adapters. This will allow for proper jumper swing if the bulkhead is opened. (Figure 1)
The slack can then be dressed up using the supplied Velcro strips. (Figure 1)
Jumpers can also enter through the 2" conduit opening provided in the rear of the wall box by removing the
conduit sealing plug.
Pre-connectorized jumpers or OSP cables can be sealed in the same fashion as the distribution side by using a liquid tight
fitting around the cable. (Figure 2)
Figure 1
Figure 2
13
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
Manual 020012 REV A - Aug 2018