ESI ES2247B Instrukcje użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Termostat ESI ES2247B. ESI ES2247B 20 stron. 2 channel multi-purpose programmer
Również dla ESI ES2247B: Instrukcja instalacji (16 strony)

Drukuj stronę

5. The display will now show the 2nd ON time. Repeat steps

3-4 until all remaining ON/OFF periods have been set. On

the last OFF period, press the Day button until the next

desired day/block of days you want to programme is

flashing.

6. Repeat steps 3-5 until all days/block of days have been

programmed. Wait 15 seconds to automatically confirm

or press the

return to Run Mode.

N.B. The copy button can be used in the 7 day setting to copy

any chosen day to the next day (e.g Mon to Tues or Sat

to Sun). Simply change the program for that day, then

push copy repeatedly until all 7 days (if you so wished)

have been changed.

Setting the Hot Water Programme

1. Move the slider to HW. Choose between 5/2, 7 day

or 24 hr programmer operation (see page 7)

2. Press the Next

desired day/block of days you want to programme is

flashing.

3. The display shows the 1st ON time. Press +/– to set the

time (10 minutes increments). Press the Next

4. The display shows the 1st OFF time. Press +/– to set the

time (10 minutes increments). Press the Next

5. The display will now show the 2nd ON time. Repeat

steps 3-4 until all remaining ON/OFF periods have

been set. On the last OFF period, press the Day button

until the next desired day/block of days you want to

programme is flashing.

6. Repeat steps 3-5 until all days/block of days have been

Home button. Move the slider to RUN to

button. Press the Day button until the

button.