ESI ESCTP-RF Instrukcja instalacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat ESI ESCTP-RF. ESI ESCTP-RF 12 stron. Programmable cylinder thermostat
Również dla ESI ESCTP-RF: Instrukcje użytkownika (16 strony)

Drukuj stronę

2. Installation

Installation safety instructions

2.1

The unit must be installed by a suitably qualified person in

accordance with the latest IEE Wiring Regulations. Isolate

mains supply before commencing installation. Please read all

instructions before proceeding.

Ensure that the fixed wiring connections to the mains supply is

via a fuse rated at not more than 3 Amps and Class 'A' switch

having a contact separation of a minimum of 3mm in all poles.

The recommended cable sizes are 1.0mm² or 1.5mm². No earth

connection is required as the product is double insulated but

ensure continuity of earth throughout the system.

General safety instructions

2.2

This product complies with the essential requirements of the

following EC Directives:

• Electro-Magnetic Compatibility Directive 2014/30/EU.

• Low Voltage Directive 2014/35/EU.

• EC Marking Directive 2014/30/EU.

Please leave the user instructions with the end user where they

should be kept in a safe place for future reference.

Warning notices

2.3

WARNING: Always isolate the ac mains supply before

installing. This product must be fitted by a competent

person, and installation must comply with the guidance

provided in the current editions of BS767 (IEE wiring

regulations) and part "P" of the building regulations.