ESI MAYA22 USB Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający ESI MAYA22 USB. ESI MAYA22 USB 14 stron. Flexible high performance 24-bit usb audio interface

Drukuj stronę

ESI

MAYA22 USB

After the installation, the panel can be found in your Applications folder. You can launch it in the

Finder via Go> Applications > MAYA22 USB Panel. The following dialog appears:

The panel has the following functions and sections:

INPUT section: this section controls the input monitoring volume of the incoming signal from the

hardware. A pair of mono faders can be controlled together or individually depending on your

mouse position – perfect for stereo signals. The Mute button the channel allows you to mute the

signal. A red Mute button indicates that the mute function is enabled. When disabled, the button is

gray.

OUTPUT section: this section controls the playback volume of the playback signal from your audio

applications. The pair of mono faders can be controlled together or individually depending on your

mouse position – perfect for stereo signals. The Mute button the channel allows you to mute

playback. A red Mute button indicates that the mute function is enabled. When disabled, the button

is gray.

4.1 Input Selection

With the buttons on the left side, you can select the line input (Line In), the microphone input (Mic),

the instrument input (Hi-Z) or simultaneous recording of microphone and instrument signals (Mic

Hi.Z) via the corresponding button. When Mic Hi-Z is selected, the microphone input signal will be

recorded on the left input channel 1 and the instrument signal on the right input channel 2.

4.2 Input Monitoring

The Mon button (located between INPUT and OUTPUT) allows you to enable realtime input

monitoring. Once enabled all incoming signals are audible through the output. You can control the

input monitor level, the input level and the output level with the faders in the control panel.