ESI CLIMB2-SLV Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Stojaki i stojaki ESI CLIMB2-SLV. ESI CLIMB2-SLV 10 stron. Dual monitor sit/stand workstation

Drukuj stronę

ASSEMBLY

Attach the Paddle to the Keyboard Platform

By default, the paddle is attached to

the right side of the keyboard platform,

where there are two holes for the

M6x15 screws. If desired, the two

screws on the left side of the

platform may be moved to the

right side so that the paddle can

be attached on the left side.

• Use the 4mm Allen key to

secure the paddle on the left

or right side with the M6x15 screws.

Attach the Keyboard Platform

• Using the 4mm Allen key, attach the keyboard platform with two M6x8 screws,

as shown. Tighten securely.

• After attaching the keyboard platform, route the paddle cable through the

clips on the underside of the writing platform.

Paddle on

Right Side

(Default)

Route Paddle

Cable Through

Clips

Move Screws for

Left-Side Paddle

Writing

Platform

M6x8

Keyboard

Platform

CLIMB2