dIXEL COOL MATE XLH360 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler temperatury dIXEL COOL MATE XLH360. dIXEL COOL MATE XLH360 16 stron. Temperature and humidity controller for seasoning-maturing cabinets

Drukuj stronę

dIXEL

8. THE DISPLAY

To display and modify target temperature set point. (SET TEMP) for the running (St1)and

the dripping (StG) phase.

To display and modify target humidity set point (SET %RH) of the running (SH1) phase; in

programming mode it selects a parameter or confirm an operation.

In programming mode it browses the parameter codes or increases the displayed value.

If oA2=ESt hold it pressed for 3s to start a extraction cycle

To start a manual defrost: hold it pressed for at least 3s.

In programming mode it browses the parameter codes or decreases the displayed value.

Switch ON and OFF the light, if present (oA1=lig)

Start: to start the cycle

Clock: to set the duration of the dripping (dri), running (on) and stopping (off) phases

Switch ON and OFF the instrument.

KEY COMBINATIONS

8.1 ICONS AND SYMBOLS

Each LED function is described in the following table.

LED

MODE

° C

1592017410 XLH360 GB r1.0 15.04.2005.doc

Operating Instructions

To lock and unlock the keyboard

To enter the programming mode.

To exit the programming mode.

FUNCTION

- Instrument in stand by.

- In "Pr2" indicates that the parameter is also present in "Pr1".

°C

SET

XLH360

cod. 1592017410

cod.

1592017410

cod.

1592017410

%RH

6/16