ClearMirror 18100-1836BL Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz ClearMirror 18100-1836BL. ClearMirror 18100-1836BL 6 stron. Led back-lit and side-lit fog-free vanity mirrors
Drukuj stronęWARNING: This stage requires a qualified electrician and conformance with both the National
Electrical Code and local building codes. Turn off the power to the circuit connected to the light
fixture at the disconnect means. Failure to do so could result in death or serious injury.
• Run a switched power supply cable to the
new junction box.
• The transformer power supply is designed to
be wired into a standard 110V US outlet
installed by licensed electrician meeting all
local and U.S. building codes. Wire electric
box so that a wall switch will turn the mirror
on and off.
• Place mounting plate (without mirror) against
wall and center cut-out over junction box.
Mark four mounting hole locations, note the
direction of the arrows for up and attach
mirror mounting plate to the wall.
• Screw into studs where possible or use
appropriate drywall anchors. Installer is
responsible for determining and using the
appropriate fasteners to fasten mirror to wall.
Hang the mirror onto the wall hanger. Both
upper and lower hangers must be inserted
into the mounting slots.
NOTICE: Always use two people
when moving and installing.