ClearMirror ShowerLite 16104-121212BL Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wyposażenie wnętrz ClearMirror ShowerLite 16104-121212BL. ClearMirror ShowerLite 16104-121212BL 6 stron.
Drukuj stronęNOTICE: This stage requires two people. One to hold the mirror and another to connect the
wires. Use electrical tape to prevent connections from coming apart.
MOUNTING THE MIRROR
1. One person holds the mirror while another connects & tapes the leads to the spider connector.
2. Feed the excess lead wires into the opening.
3. Test to make sure LEDs and the heater are working. It takes 3 to 5 minutes to heat the mirror.
4. Apply mirror mastic adhesive to the mirror back on areas that will contact the wall board. It is
safe to apply mastic on the heater.
5. Apply a continuous bead around the entire edge perimeter to protect mirror, as shown in
Figure 3.
6. Carefully mount to the wall.
7. Securely tape and brace the mirror in place for 24 to 48 hours or until dry.
Apply continuous mastic bead around
the entire edge of mirror back to create
a vapor seal.
Use Premium Mirror Mastic for Best Results
To prevent damage to the mirror backing, use Gunther Premier Plus Mirror Mastic. It is available
from your local mirror/glass specialist or online through Amazon or CR Laurence.
This product does have a shelf life so we are not able to provide it with your shower mirror.
Other mirror mastics will work but Gunther Premier Plus is recommended. See ClearMirror.com/FAQ
Figure 3. Applying Mirror Mastic.
Mirror Back
Heater
LED