Akiyama DX-101 USB-R Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Gramofon Akiyama DX-101 USB-R. Akiyama DX-101 USB-R 14 stron. Mp3 recording usb turntable
Również dla Akiyama DX-101 USB-R: Instrukcja obsługi (11 strony)

Drukuj stronę
OPERATION
Push power button to on.
1.
Insert target light for illumination the stylus.
2.
3.
Place a record on the turntable mat. When
playing a 45rpm record with a large center hole;
place the 45rpm adapter on the center spindle.
4
. Set the rotation speed (33/45) to match the
record.
Release the arm clamp.
5.
Set the cueing lever to the up position.
6.
7.
Press the Start/Stop button and the turntable
platter will start to rotate.
8.
Move the tone arm over the desired groove.
9.
Set the cueing lever to the down position, the
tone arm will descend slowly onto. The record and
play begins.
Adjust the pitch to a desirable speed, move the
10.
pitch control slider up or down to adjust the speed.
11.
To suspend play, lift tone arm with cueing
lever.
12.
When play is finished, raise the cueing lever,
move the tone arm to the arm-rest and secure the
tone arm with the arm clamp.
. Press the Start/Stop button to stop the platter
13
rotating.
14. Push the Power button to off.
R E C O R D I N G O N A U S B M E M O RY
("PENDRIVE" o "HARD DISK")
a.
Insert a flash-disk (e.g.memory stick, MP3 player)
into the USB slot
b.
Position the stylus at the track you want to record
c.
Press the "play/pause" button to pause the
recordplayer
d.
Press the "record/stop" button and wait until the
LED will flash (this may take several seconds
depending
on the contents on the flash-disk)
e.
Press the "play/pause" button to resume playing
the track
f.
Press the "record/stop" button to stop the
recording process
g.
The track is now stored on the flash disk as an
192kbps MP3 file, tracks will be numbered in
sequence and placed into a folder called "audio"
5
DX-101USB-R OPERATION
MAINTENANCE
- Clean the stylus periodically with a soft brush to prevent the
accumulation of dust.
- When the sound becomes distorted or noisy, check the stylus.
If worn out, replace it with a new one.
- From time to time,the dust cover and turntable cabinet should
be wiped with a soft and dry cloth.
- Any volatile materials such as alcohol, thinner, benzine, etc.,
may remove the paint or damage the lustre, please avoid.
BELTASSEMBLY
Turning the platter over, connect the belt to the turntable drive.
Place the platter on the spindle and spin the platter until the belt
position holes (the two larger holes nearest to the belt) are
showing the motor drive shaft in the top right corner. When this
is exposed, carefully stretch the belt around the shaft, ensuring
that the belt does not twist. The platter should still spin freely,
but with slightly more resistance than before.
HOOK UP
DX-101USB
RECORD
Connect Turntable to a PC or MAC.
R/L
R/L
17
USB
DX-101USB-R
RECORD
16 PHONO
R/L
Pen Drive
Hard Disk Drive
R/L
USB
16
17
PC/MAC
USB
PLAYBACK
16 PHONO
17 LINE
17 LINE
PLAYBACK
Set (PHONO/LINE) switch to chose
signal type at RCA (17) Output. According
to selected signal mode we can connect to
a Line level or a Phono level channel of a
mixer as seen at the draw.