ACOUSTIC SOLUTIONS SP100 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz ACOUSTIC SOLUTIONS SP100. ACOUSTIC SOLUTIONS SP100 17 stron. Hi-fi separates integrated amplifier
Drukuj stronęUSING THE FUNCTION MENU
This SP100 amplifi er is fi tted with a digital user interface which allows complete control of the features of this amplifi er.
The menu structure of this product is as follows:
1.
2.
3.
4.
5.
6.
8
Volume control default setting
The default setting for the user interface control is the 'volume' setting. This will be displayed on
line one of the LCD display as a numeric dB value.
Note: dB values are a professional indication of the amplitude of an audio signal with full or
maximum output achieved normally at 0dB. You will notice the LCD display on this amplifi er will
read minus dB fi gures up until zero which will indicate maximum output.
The rotary control (10) can be turned both clockwise and anticlockwise to alter the dB signal. There
are 64 steps in total which range from -78.75dB for nil volume, to 0dB which will provide maximum
output.
We have also provided a bar graph display on line 2 of the LCD display, which indicates the status
of the volume control when rotated. There are 16 squares (
change pro-rata to the increase or decrease in volume
This display will replace the input music source description on line 2 of the LCD display while the
volume control is operated. This bar graph display will remain for a period of approx 5 seconds
following the end of this volume change and will then return to indicate the input music source as
the default following this time.
) which run from left to right and will