Akiyama MX-2 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikser muzyczny Akiyama MX-2. Akiyama MX-2 13 stron.

Drukuj stronę
MX-2

Front Panel

–Adjusts microphone input level.
1. Mic Input Gain
2. Treble and Bass EQ
frequency levels of the input channels for good sound.
3. Input fader
- Controls individual source levels
(channels) in the mix.
4. Replaceable Crossfader
between the two input channels. "Hard left" selects
Channel 1. "Hard right" selects Channel 2. With the
crossfader centered, both assigned channels are live.
Use the crossfader for fast and seamless segues (fades)
from one selected channel to the other.
Note: The crossfader is user replaceable in case of
failure. Simply unscrew the two large screws which
hold it in place, lift it out and disconnect it's cable. Re-
attach the new crossfader and screw the mounting plate
back onto the unit - you're back in business!
– Insert your Microphone with ¼" plug in
5. Mic Input
here.
6. Headphone Input
– Insert in the ¼" plug for your
headphones here.
7. Input toggle switch
- Selects which source will be
active based on what you have connected to the rear
panel input section (phono/line).
8. Channel Cue / Cue Pan
audio to your headphones. Listen here before bringing
up channel faders or moving the crossfader.
–Adjusts cue volume.
9. Headphone Level
10. Master Fader
- Controls the overall output level.
– Adjusts the pre-fader volume for
11. Channel Gain
cleaner sound.

Rear Panel

12. Power Switch
– turns unit off and on.
13. Power Connector
- Plug in power adapter
here and check the voltage level to match your
country's standard.
– This function works in
14. Fader Start
conjunction with a compatible fader start CD
player. When used with a compatible CD
player, you can use the crossfader to start and
stop the CD player with the slide of the fader.
The fader start switch activates the fader start
feature. When in the ON position, the fader
start allows the fader to return automatically
to preset digital CUE POINTS on your
compatible CD Player.
15. Stereo Main Outputs
16. Line Inputs
- Unbalanced RCAjacks for connecting stereo audio from line level sources such as CD players,
HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, laser discs, tuners, even synthesizers or other
mixing consoles.
17. Phono Inputs
– Plug your turntables in here. When these connectors are used, your signal is fed directly to
the high-quality RIAA phono pre-amplifiers. Use this position only for turntables. Line level sources will
overload the sensitive phono pre-amps and will cause distortion.
18. Grounding lug
- for turntable connection. Always use this connection when using standard turntables with
ground cable.
- Adjusts the high and low
- Achieves clean segues
- Used to preview channel
- Unbalanced RCA connectors controlled by the Master fader.

MIXER CONTROLS

11
11
channel 1
mic
1
1
2
2
min
max
mic
level
high
-10dB
12dB
high
low
7
7
-10dB
12dB
low
3
3
channel 2
4
4
fader
start 1
6
6
5
5
mic
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AKIYAMA. 08191 BARCELONA (SPAIN)
CAUTION, RISK OF ELECTRIC SHOCK, DO NOT OPEN.
ATENTION: TO REDUCE RISK OF ELECTRIC SHOCK DO
N O T O P E R AT E I N S I D E T H E E Q U I P M E N T. F O R
MAINTENANCE CONTACT YOUR DEALER OR QUALIFIED
PERSONNEL.
remote
fader
fader
start 2
start 1
12
13
14
15 16
MX-2
channel 2
master
min
max
min
max
min
max
gain
gain
master
level
high
-26dB
12dB
-26dB
12dB
min
max
cue
level
low
ch1
ch2
-26dB
12dB
-26dB
12dB
cue
pan
on
channel 1
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
0
0
Master Output dB
heaphones
17
18
10
CUE
9
8
fader
start 2
8