Akiyama ACU-4 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Odtwarzacz MP3 Akiyama ACU-4. Akiyama ACU-4 14 stron. Usb mp3 player

REMOTE CONTROL
Plug remote connector of ACU-4 Player at A (left side) of the Mixer remoter Fader Start.
PlugAudio RCAoutput ofACU-4 Player to the Mixer channel selected toA.
-
Mode Cue/Play
. When selected at Display it will appear (CUE/PLAY)
Every time you raise Crossfader from B side to A side the ACU-4 Player will start Playback
and when you slide the Crossfader to B side player will enter Pause mode.
1
Starts Playback
A
B
XFADER
-
ModeTact
. When selected at Display it will appear (TACT)
TACT - If your CDS-MP400S is playing, advance it to B. A is not affected. When advancing
back to A, CDS-MP400S is paused. The same action do it again. To B and back to A. The
pause status is becoming to play. So you will see that every time you touch A. It will
play,pause,play,pause.......If we haveACU-4 in Playback mode:
1
Enters Pause
A
B
XFADER
-
Mode Lock
. When selected at Display it will appear (LOCK)
Every time you close the fader to A (slide from B to A), it will cause a short play of the music
and immediately pause. It sounds like the Scratch skill, Chopping. All these function you
can connect a player with TACK/LOCK to B. Interesting feature to perform strange mix
effect like beat juggling.
A
B
XFADER
PARTITION/FOLDER/TRACK
When your storage device exceeds more than 500 MB or even 500 GB. You will make many
partitions like C,D,E...and so on in your PC. You may put many musics at differnt folder and
put many folders at different partitions. We have supported this partition design. If on pause
mode pressing three seconds, it will appear the total partition. Selecting the partition first so
that you can choose the folder music and track you would like to play.
When plugging in your USB device, if it only got a single partition, it will not appear the
command to let you select the partition. Because it's already go to the first partition. But if
many partitions, the condition just like my description above.
With a normal pressing (not for 3 seconds), it switch the total folders and the total tracks.
PERFORMING FUNCTIONS
2
Enters Pause
A
XFADER
2
Starts Playback
A
XFADER
Every sharp move from B to A will allow for a
short play of the music and immediately pause.
EDITINGAND CALLING "LISTS"
If
you have a 500GB USB storage device and you want to play the second track when it's
already playing the first track. Maybe you will not exactly know at which folders and
partition you put the song you would like to play .
Some DJs will make Playlist on computer first. For example, you wanna play 50 songs as a
party. But it's impossible to search the song when you are Djing because maybe your storage
data are not classified at the same folder. So editing the Playlist by your computer and store
the list in your USB device.
EDITALIST
First of all, you must hook up your USB device to your PC. Place the music you wanna use
to your USB device. Then open your MP3 media player like I Tune, Winamp and
B
Windows Media Player. Select to make a list through the software but must select from
your USB device.
Now you can add the songs to make the lists. In the end when completing the list,
the list in the root of your USB
device.
PLAYTHE LIST
Press 3 seconds TIME/LIST button. Select between
XML
(list created with I Tunes or
Player). Press the list type you desire and the Display will show the available lists of the
extension.
B
EFFECTS PARAMETER
Once you select and effect (it will show at Display) you can change the Parameter by turning
the wheel. The value of the effect parameter will appear at Display.
1- Select i.e. Flanger >At Display you read FG 200 > 200 is the parameter current value.
2- Move the wheel to change parameter. The Display will show new parameter value.
- Flanger parameter ranges from 0 to 800.
- Echo parameter ranges from 0 to 800.
- Filter parameter ranges from -60 to +60.
WHEELFUNCTIONS
The Wheel has many functions:
- Pitch bend: In Playback mode use it to fine tune the Playback to synchronise two tracks.
- Quick Search (Track): Select first SEARCH, spin the wheel and you will advance or
reverse the track fast.
- Quick Search (Folder/Track): Select first FOLDER, at Display shows F SEL. Press
and turn the Wheel for quick search of Folders. Press FORLDER again to enter the rack at
the Folder (Display shows the name of first track). Press
quick search of Tracks.
- Effects Parameter.
- Fine tunning a Loop: While at Loop Edit Mode, display shows B-EDIT. Move the Wheel to
lengthen or shorting the Loop.
ACU-4
can call the list out.
. You can add the songs crossing many folders in your USB
M3U
(list created with Winamp)
Flash Media , WPL
)
(list created with Windows Media
"
/
"
save in
,
" / "
T
and turn the Wheel for
5