ClearSounds Quattro 4.0 Skrócona instrukcja obsługi
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Wzmacniacz ClearSounds Quattro 4.0. ClearSounds Quattro 4.0 4 stron. Neckloop with removable bluetooth mic (bt4)
Również dla ClearSounds Quattro 4.0: Skrócona instrukcja obsługi (4 strony)
Drukuj stronęQUATTRO 4.0 QUICKSTART GUIDE
Home Screen:
The screen
displays the following
information:
a) Devices connected to
the Quattro 4.0
b) Headphones plugged
into the Quattro 4.0
c) Battery charge level
The Home Screen
display remains active
for approximately 8
seconds, then goes dark.
To re-activate the screen,
simply tap the
Touch
Function Key (TFK) or Multi
Function Button (MFB).
MFB
Base Multi-Function Button:
button is used to initiate & answer calls, turn
the Quattro 4.0 on & off, activate the LCD
screen, pair the Quattro 4.0 to Bluetooth de-
vices (e.g. mobile phone), switch between calls
and initiate Siri or S-Voice for voice activation.
MMFB
Microphone Multi-Function
Button:
This button is used to pair and
connect the QT4 Mic to the Quattro 4.0 unit
and adjust the sensitivity level of the QT4
Mic.
USING THE QUATTRO 4.0
1.
CHARGING THE QUATTRO 4.0
STEP 1: Use the tip
of a pen to move the
battery engagement
+/- switch into the
+ position on the
Quattro 4.0.
Do NOT turn it off!
TIP: Charge the Quattro 4.0 every night for maximum performance. The battery icon will
identify when battery power is running low on the main base. On the QT4 Mic, the indicator
light will turn red. The QT4 Mic can be charged any time with the mic clip charger.
TFK
Key:
is used to answer & end
phone calls. It activates
the LCD screen and
pauses & plays music.
Tap twice to activate
the voice control for the
second device.
Volume & Scroll Touch
Keys:
used to turn the volume
up or down, scroll
through the menu or skip
forward & back when
listening to music.
This
Battery Engage Switches:
4.0 unit. This switch MUST be in the
function. By switching to the
does NOT need to be put in the
during storage.
STEP 2: Plug
STEP 3: Plug
charger into
charger into outlet
Quattro 4.0.
to fully charge the
Quattro 4.0.
www.clearsounds.com
Touch Function
The touch sensor
8-wire Neckloop:
around your neck like a necklace. This is an 8-wire
loop that connects to hearing aids or cochlear im-
plants with t-coils, delivering sound directly through
the hearing aids or cochlear implants when they are
These keys are
in t-coil mode.
Earbud Jack:
only headsets. We package the Quattro 4.0 with our
patented SmartSound Earbuds.
There is a battery engage switch on both the QT4 Mic and the Quattro
+
position on both the Mic & Quattro 4.0 for the units to
–
position, the battery is disengaged from the circuit. This switch
–
position; its purpose was to protect the integrity of the battery
STEP 4: "Charging"
appears on the
screen and the red
light is on.
This cord hangs the Quattro 4.0
This jack accepts any 3.5mm audio
STEP 5: Quattro
4.0 is charged when
screen indicates
100% and battery
icon shows full.