ClearSounds QUATTRO 4L Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Aparat słuchowy ClearSounds QUATTRO 4L. ClearSounds QUATTRO 4L 2 stron.
Drukuj stronę1.
CHARGING - ENGAGE THE BATTERY
STEP 1: Use the tip
of a pen to move both
battery engagement
+/- switches into the
+ position on the
QUATTRO 4L and
BT4 Removable Mic.
Do NOT turn them off!
2.
PAIRING QUATTRO WITH BLUETOOTH DEVICE
•
Make sure other connected Bluetooth devices are turned off when syncing a new Bluetooth device.
STEP 1: While the
QUATTRO 4L is turned
off, press and hold
multi-function button for
approximately six seconds.
3.
TAKE A CALL
OR
STEP 1: To answer a
call, you just need to
briefly press the MFK
(multi-function key) or
the MFB (multi-function
button) on the side, no
need to press twice.
STEP 2: Plug
STEP 3: Plug
charger into
charger into outlet
QUATTRO 4L.
to fully charge the
QUATTRO 4L.
TIP: Charge the Quattro 4 with the BT4 Mic attached every
night for maximum performance. The battery icon will
identify when battery power is running low on the main base.
On the mic, the indicator light will turn red.
STEP 2: The
QUATTRO 4L
announces Pairing,
and the LED light will
flash red and blue.
HOLD
STEP 2: To reject
the call: Press
and hold the
multi-function
button.
STEP 4: A red light
will appear on the
faces of both the
Quattro 4L and
BT4 Mic.
STEP 3: Turn on the
Bluetooth device and put
it in Bluetooth pairing
mode. Often this requires
device menu selections
such as Settings >
Bluetooth > ON >
Click QUATTRO 4L.
<
STEP 3: Adjust the
>
volume: Press
(volume -) or
(volume +).
STEP 5: QUATTRO
4L and BT4 Mic are
charged when the red
lights turn blue. They
will not necessarily
turn blue at the same
time.
"Paired"
STEP 4: When the
Quattro 4L
announces "Paired"
then "device one
connected" you are
ready to use your
Quattro 4L.
STEP 4: To end
call, press and
hold multi-function
key. The QUATTRO
4L announces "call
terminated".