Altox TRACKER-5 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe Altox TRACKER-5. Altox TRACKER-5 8 stron.

General Guide for Installation

- Installation of devices in the car's cabin is as far as possible (at least

Altox

10cm) from the metal body parts and wiring harnesses.

- For better receiving of GPS-GLONASS signals install the top housing of the

device to the windscreen avoiding metal barriers.

Recommended place of installation behind the dashboard driver.

- Recommendation: connect device supply directly to the OBD-II connector

wires where pin 16 is +12В, pin 4 is GND (common).

- To implement the function of blocking the operation of the engine, use

the power relay controlled by the OUT output to break the power supply of

the fuel pump (or other electronic unit) of the vehicle.

- To monitor the status of door switches, use the «IN» input (waiting for a

short to GND).

Please indicate the place of ALTOX module's location in the vehicle for

possible maintenance:

[RU] Руководство пользователя

Authorized Service:

Installation Date:

ALTOX TRACKER-5