Dixon Holedall 25 Ton Ram Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Dixon Holedall 25 Ton Ram. Dixon Holedall 25 Ton Ram 6 stron. External swaging of standard holedall
Drukuj stronę
25 Ton Ram Instruction Manual
Assuring that the hose end is cut square, chamfer the
I.D. of the hose 1/8" at a 45° angle (this is to relieve
hose end flare of rubber tube hoses during stem inser-
tion). If the hose is to be static grounded, follow hose
manufacturers procedure for proper static grounding.
Lubricate the I.D. of the hose and the O.D. of the stem
with Dixon lubricant or equivalent. Insert the stem all
the way into the hose until the ring on the stem comes
in contact with the end of the hose.
Slide the ferrule over the stem and over the O.D. of the
hose until the turned over portion of the ferrule rests
on the ring of the stem.
Lubricate the outside of the ferrule with Crisco®
(recommended) or a high viscosity oil or heavy
duty grease.
Section 2
5
6
7
8a
customer service
800•355•1991
Externally Swaged Holedall
2