ClearSpan 105366 Podręcznik - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik dla Zestaw do szklarni ClearSpan 105366. ClearSpan 105366 13 stron.
Drukuj stronęCLEARSPAN
END FRAME KIT
™
YOU MUST READ THIS DOCUMENT BEFORE YOU
BEGIN TO ASSEMBLE THE SHELTER.
Thank you for purchasing this ClearSpan™ End Frame Kit.
When properly assembled and maintained, this product will
provide years of reliable service. These instructions include
helpful hints and important information needed to safely
assemble and properly maintain the end frame. Please
read these instructions before you begin.
If you have any questions during the assembly, contact
Customer Service for assistance.
SAFETY PRECAUTIONS
•
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling the materials.
•
Use a portable GFCI (Ground Fault Circuit Interrupter)
when working with power tools and cords.
•
Do not climb on the shelter or framing during or after
construction.
•
Do not occupy the shelter during high winds,
tornadoes, or hurricanes.
•
Provide adequate ventilation if the structure is
enclosed.
•
Do not store hazardous materials in the shelter.
•
Provide proper ingress and egress to prevent
entrapment.
WARNING: The individuals assembling this structure
are responsible for designing and furnishing all
temporary bracing, shoring and support needed during
the assembly process. For safety reasons, those who
are not familiar with recognized construction methods
and techniques must seek the help of a qualified
contractor.
2
ASSEMBLY PROCEDURE
Following the instructions as presented will help ensure the
proper assembly of your end frame. The steps outlining the
assembly are as follows:
1. Verify that all parts are included in the shipment. Notify
Customer Service for questions or concerns.
2. Read these instructions and all additional
documentation included with the shipment before you
begin.
3. Gather the tools, bracing, ladders (and lifts), and
assistants needed for assembly.
4. Check the weather before you install the film (if
equipped). Do not install covers or panels on a windy
or stormy day.
5. Assemble the end frame and door (if equipped).
6. Read the care and maintenance information at the end
of these instructions.
7. Complete and return all warranty information (if
included) as instructed.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the end frame. Additional tools and supports may
be needed depending on the structure, location, and
application.
•
Tape measure or measuring device
•
Variable speed drill and impact driver (cordless with
extra batteries works best)
•
Wrenches and impact socket set, or an adjustable
wrench
•
Scissors or utility knife
•
Hammers and gloves
•
Ladders, work platforms, and other machinery for lifting
designed to work safely at the height of the building
and end frame.
Revision date: 05.18.10