Edgeware pro angle adjust electric knife sharpener Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Edgeware pro angle adjust electric knife sharpener. Edgeware pro angle adjust electric knife sharpener 7 stron. Electric knife sharpener

Drukuj stronę
surface of the wheels by a highly technical process that guarantees longer wheel life, uniform
cutting, and minimal heat build up. Our wheels are manufactured in the United States according
to strict tolerances in order to ensure the same high quality and performance of each and every
wheel that we use. This protects your blade from getting damaged or de-tempered when using
this sharpener.
NOTE: Diamond Break-In Period –
The initial aggressive cutting speed of the Diamond Sharpening
Wheels will slow with use. At the same time, the abrasive finish will improve. Do not be confused by
this break in process because it is normal and should be expected. The diamond wheels are breaking
in, NOT wearing out.
Ceramic Interlocking Wheels (Fine Sharpening Slot)
The Pro Angle Adjust Electric Knife Sharpener comes with extra fine ceramic wheels which
provide superior edge producing capabilities while removing minimal material from your knife
edge.
Non-Slip Rubber Feet
Provides secure and stable sharpening conditions on all types of surfaces.
SHARPENER MAINTENANCE AND CARE GUIDE
Follow these easy tips and instructions to keep your Edgeware electric knife sharpener in prime
condition for years to come:
DOs
• Read the Instruction Manual thoroughly before using the sharpener.
• Clean all dirt and food from knives before sharpening.
• Always hold knife parallel to the tabletop so knife contacts both wheels equally.
• Always place unit on sturdy flat surface.
• Hold knife securely but comfortably in your hand.
• Always pull the knife blade through the wheels at the recommended speed.
• Use light downward pressure to establish contact with the wheels.
• Handle sharpened knives with care since they will be sharper than you expect.
• Unplug sharpener when not in use and when cleaning.
• For questions or assistance, call Customer Service at (800) 221-4156 or
visit our website at www.edgewareproducts.com.
DON'Ts
• Do not use to sharpen ceramic or serrated style knives.
• Never use lubricants on the wheels.
• This sharpener is designed to sharpen knives. Do not try to sharpen any other
types of blades on this sharpener.
• Never test sharpness with fingers.
• Do not use sharpener for other than intended use.
• Never insert the tip of the knife into the wheels or damage to the knife will occur.
• Never use the sharpener if cord is damaged.
• Do not use outdoors.
• Do not use excessive force when sharpening your knife.
• Not recommended for use by children
• Any cosmetic or mechanical changes to the product will void the warranty. Sharpener has
a built in motor thermostat as a safety feature. It protects sharpener from overheating if left
on accidentally for a long period or is being used improperly.
Read all IMPORTANT SAFEGUARDS and OPERATING INSTRUCTIONS
Asian Straight Edge Style Knives -
Light Honing of Double–Beveled Asian Style Knives
USE FINE CERAMIC SLOT ONLY
Step 1. Always start by turning the knob to 10°, then turn the knob to the correct angle.
If the original manufacturer's angle is unknown we suggest using the standard Asian angle
marked on the angle adjust knob (16º per side).
Step 2. Turn the power on and insert blade into the electric sharpening slot.
Step 3. Lower the blade to make contact with interlocking wheels. (Fig. 1) When your blade
contacts the wheels and self aligns itself pull through slot from heel to tip (Never back and forth)
using moderate downward pressure. Use a smooth consistent stroke to pull the knife blade
through the slot at a speed of 1 second per 2 inches. If the blade curves up to the tip, lift the
handle near the end to sharpen all the way out to the tip. (Fig. 2) Repeat a minimum of 10 times.
NOTE: Knives made of extremely hard steel may require additional pulls through the slot when
sharpening the edge.
Step 3. Check the sharpness of your blade by cutting a piece of paper or a fruit or vegetable. If
additional sharpening is needed repeat process until sharp but make sure to clean your knife
before continuing. If not turn off power to the machine.
Traditional standard European/American and Standard Asian Style knives
40°
32°
35°
20°
17.5°
16°
Sharpening Extremely Dull or Damaged Double–Beveled Asian Style Knives (USE BOTH
THE COARSE / DIAMOND and FINE / CERAMIC SLOTS)
Step 1. Always start by turning the knob to 10°,
then turn the knob to the correct angle. If the original
manufacturer's angle is unknown we suggest using the
standard Asian angle marked on the angle adjust knob
(16º per side)
Step 2. Turn the power on and insert blade into the
Coarse / Diamond electric sharpening slot.
Step 3. Lower the blade to make contact with
OPERATING INSTRUCTIONS
thoroughly before using this product.
32°
European / American style
knives average between 12°
16°
to 20° on each side.
40°
35°
20°
Double beveled Asian Style
17.5°
Knives average between 11°
to 17° on each side.
Fig. 1