ClearView IPD-81A Skrócona instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kamera bezpieczeństwa ClearView IPD-81A. ClearView IPD-81A 16 stron. Hd ir vandal proof wedge dome network camera

Drukuj stronę

Alarm input, output description:

Step 1

Connect alarm input device to the alarm input of I/O cable.

Step 2

Connect alarm output device to the alarm output of I/O cable, alarm output is collector open

circuit output which connects 10K resistor to 3.3V externally.

Step 3

Open the Web, set alarm input and output correspondingly. Alarm input on WEB corresponds

to I/O cable on device. When there is alarm, alarm input device will generate signal of high

and low level. Set corresponding NO and NC inputs.

Step 4

Set the WEB alarm output. The alarm output is for the alarm output port of the device. It is the

alarm output port of the I/O cable.

Please refer to the following figure for alarm input information. See Figure 1-7.

Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of

the alarm input port. When the input signal is connected to 3.3V or it is idle, the device collects the

logic "1". When the input signal is grounded, the device collects the logic "0".

Please refer to the following figure for alarm output information. See Figure 1-8 and Figure 1-9.

Figure1-6

Figure 1-7