Edgewater Networks EdgeMarc 5300LF Instrukcja instalacji sprzętu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Router sieciowy Edgewater Networks EdgeMarc 5300LF. Edgewater Networks EdgeMarc 5300LF 20 stron.
Również dla Edgewater Networks EdgeMarc 5300LF: Skrócona instrukcja obsługi (8 strony)

Drukuj stronę

Getting Started

Physical Installation

The 5300LF is designed for rack mount installation. Observe the following guidelines when

installing the system:

Always verify that the AC cord is disconnected from a power source prior to installation.

•

Ensure that the installation site has adequate air circulation and meets the minimum

•

operating conditions for the system as specified in Specifications section of this document

Required Tools and Materials

Ethernet cables − to connect the LAN ports to LAN switches or to individual IP phones.

•

They can also be used to connect the Ethernet WAN port to a WAN router, a Cable Modem

or a DSL Modem, if T1/E1 port is not being used to connect to the WAN.

Rack-Mount Installation

Note

The 5300LF 19" Rack Mount Kit is used with "revision B" 5300LF systems only. These

systems have the assembly number (A/N) "120-4300T-01-B" listed on the bottom of the

chassis.

1. Mount the completed assembly into your 19" equipment rack.

Connecting the Power and Cables

The 5300LF comes with an AC power cord and power adapter for connecting the unit to the AC

outlet.

Warning

Always connect the AC power cord to an AC outlet suitable for the power supply that came with

the unit in order to reduce the risk of damage to it.

Connect one end of the AC power cord to the power adapter and the other one to the AC

•

outlet.

Connect plug from the power adapter to the Power Connector on the 5300LF. Sometimes

•

a little force is necessary to get the plug properly positioned

Caution