ClearView Easy Slide Instrukcja montażu - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria samochodowe ClearView Easy Slide. ClearView Easy Slide 16 stron.
Również dla ClearView Easy Slide: Instrukcja instalacji i obsługi (6 strony)

Drukuj stronę

Assembly Instructions

6. Place plastic chocks on the back edge of the fridge tray. This will be required to hold

the tray in a lowered position.

7. Manoeuvre the handle arms so that notches at the base of arms lines up with pivot

bolt found on strut fixing plate. This bolt will act as a temporary pivot point for lowering

the fridge tray.

8. Lower the fridge tray by pushing down on the handle, until top groove of plastic

chocks slips under the back edge of the tray assembly frame. A moderate amount of

downward force is required when the Easy Slide® is empty. The plastics chocks will

prevent fridge tray from lifting back up.

9. Release handle and manoeuvre the arms until bolt holes on arms align with threaded

fixing points. Secure the arms with M10 bolts and washers, using 6mm Hex Key.

clearviewaccessories.com.au