ClearView EXPANDA EXP-02 Instrukcja montażu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria samochodowe ClearView EXPANDA EXP-02. ClearView EXPANDA EXP-02 16 stron.

Drukuj stronę
Assembly Instructions
3
2
1
We will now fit the A, BB and C into place. Pull your bearing runners out, and align the holes
to the front of the bearing runners. Locate the third furthest hole, and align it to the button
head screw. Locate the hole on the outer side, and tighten.
Followed by the last one.
3
2
1
Now, with the back plates for Part A, BB and C, align and slide to the compatible size.
Screw in your button head screw to the furthest point again, then follow by the rest of the six
screws, three on each side.
Ensure all your screws are tightened.
Ensure your slide is clamped down, and
extend the slide out as much as possible
11
clearviewaccessories.com.au