Edgewater Networks EdgeMarc 250W Instrukcja instalacji sprzętu - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Kontroler Edgewater Networks EdgeMarc 250W. Edgewater Networks EdgeMarc 250W 19 stron. Enterprise session border
controller
Również dla Edgewater Networks EdgeMarc 250W: Skrócona instrukcja obsługi (7 strony), Skrócona instrukcja obsługi (6 strony)
Drukuj stronęGetting Started
Physical Installation
The 250W is designed for desktop installation. Observe the following guidelines when installing
the system:
Always verify that the 250W is disconnected from a power source prior to installation.
•
Ensure that the installation site has adequate air circulation and meets the minimum
•
operating conditions for the system as specified in the Specifications section of this
document.
Administration
You can configure the 250W using a web browser such as Internet Explorer or Mozilla Firefox.
The 250W is shipped with the pre-configured IP address 192.168.1.1 for the LAN port.
To connect to the 250W, follow these steps:
1. Connect the PC to LAN port 1 of the 250W.
2. Launch a web browser on the PC and enter the URL string: 192.168.1.1. Press Return.
The following login window should appear:
2
10