Edgewater Networks EdgeMarc 250W Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Edgewater Networks EdgeMarc 250W. Edgewater Networks EdgeMarc 250W 6 stron. Enterprise session border controller
Również dla Edgewater Networks EdgeMarc 250W: Instrukcja instalacji sprzętu (19 strony), Skrócona instrukcja obsługi (7 strony)

Drukuj stronę

Step 1

Connecting the Cables

1. If you are using an ADSL connection, connect one end of the phone cable to the ADSL

port (denoted by "A" in the above diagram) and the other end of the cable to the phone

jack on the wall.

Important: No DSL Filter should be installed on the line.

Note: The DSL/Line port also supports an FXO connection. Your connection to the

PSTN can be tested by attaching a phone to FXS port 4, and disconnecting the 250W

from its power source.

2. If you are using an Ethernet connection, connect one end of the Ethernet cable to the

Ethernet WAN port (denoted by "B" in the above diagram) and the other end of the

Ethernet cable to an Ethernet port on a router or a modem.

Instructions