ClearView Hawk-04 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla DVR ClearView Hawk-04. ClearView Hawk-04 7 stron.
Drukuj stronęPlease refer to the following sheet for detailed information.
SN
Name
1
Video input
4
Audio input
7
USB port
10
Power socket
6. Local Login
After system booted up, default video display is in multiple-window mode.
Click Enter or left click mouse, you can see the login interface. See Figure 3.
System consists of four accounts:
Username: admin. Password: admin. (administrator, local and network)
Username: 888888. Password: 888888. (administrator, local only)
Username: 666666. Passwords: 666666(Lower authority user who can only monitor, playback,
backup and etc.)
Username: default. Password: default(hidden user)
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and five times login failure
will result in account lock!
7. Web
Open IE and input DVR address in the address column. For example, if your DVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column.
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can't download the ActiveX file, please modify your IE security setup.
Figure 2
SN
Name
2
Video output
5
Video VGA output
8
Network port
11
On/Off button
Figure 3
SN
Name
3
Audio output
6
HDMI port
9
RS-485 input port
12
GND port
5