Edgewater Networks EdgeView 5300LF Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Edgewater Networks EdgeView 5300LF. Edgewater Networks EdgeView 5300LF 8 stron.
Drukuj stronęStep 3 − Plan Your Configuration
The EdgeMarc 5300LF can be deployed as a gateway router in a network. It can also be
deployed in a network behind an existing firewall. Based on your deployment criteria, consult
the following documents for further configuration:
5300LF Hardware Installation Guide
•
VoIP Operating System (VOS) for EdgeMarc User Manual
•
Helpful Hints
Although not recommended, the EdgeMarc 5300LF and IP phones can be installed behind an
existing enterprise firewall. In this instance the firewall will have to be configured to allow access
to and from the EdgeMarc 5300LF's public IP address for the following ports:
Port Type
UDP
RTP
TCP
Telnet
FTP
MGCP
¬
NTP
SIP
IP phones normally point to a local NTP server for their time reference. The NTP port 123
needs to be opened if your network does not have an NTP server.
Please Note: Traffic shaping for this configuration is only available if the enterprise data
devices are also installed behind the 5300LF appliance.
Firewall Ports to Open
161 (SNMP) and 162 (SNMPTRAP)
1056 to 1255
SSH TCP 22 for remote management & TCP 80 for WAN
configuration-downloads
23
TCP 21 for stateful TCP-session control from 5300LF to
Edgewater FTP server
2427, 2429, 2432, and 2727
123
5060 and 5075
Page 7 of 8