ClearView SD4250 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów ClearView SD4250. ClearView SD4250 13 stron. Sd encoder and modulator ypbpr & cvbs to dvb-t digital rf
Drukuj stronęTechnical Specifications
System
Management
Language
LCN Insertion
Upgrade
General
Power
Dimensions
Weight
Operation temperature
SAFETY INSTRUCTION
Safety Technical Specifications
WARNING: Hot plug is not allowed since it may cause system failure.
To prevent fire or electrical shock. Do not expose the device to rain or moisture.
The encoder modulator is powered with a voltage of 110 V to 220 V AC.
The power supply voltage must not exceed the recommended voltage, which otherwise may cause irreparable
damage to the device and the invalidation of the warranty.
Therefore:
• Do not replace power supply with a voltage greater than 110 V to 220 V AC
• Do not connect the device to the power if the power cord is damaged.
• Do not plug the device into mains supply until all cables have been connected correctly.
• Do not cut the cord.
Avoid placing the device next to central heating components and in areas of high humidity.
Do not cover the device with elements that obstruct the ventilation slots. If the encoder modulator has been kept in
cold conditions for a long time, keep it in a warm room minimum 2 hours before plugging into the mains. Mount the
device in vertical position with the connectors located on the top side. When replacement parts are required, be sure
the service technician has used replacement parts specified by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutes may result in fire, electric shock or other hazards.
Safety check- Upon completion of any service or repairs to this device, ask the service technician to perform safety
checks to determine that the device is in proper condition.
Local control: LCD + control buttons/ Remote:RJ-45 web setting
English
Yes
RJ-45 web setting
AC110-220
440*280*44mm
< 2.5 kg
0~45 ℃