EdgeWave IPRISM 75G Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gateway EdgeWave IPRISM 75G. EdgeWave IPRISM 75G 4 stron. Secure web gateway
Drukuj stronęiPrism Secure Web Gateway
Quick Start Guide
IMPORTANT: Please read through the Quick Start Guide prior to setup. Make sure to have your iPrism License Key file
saved to your desktop, and record the information listed in Step 1 prior to installation.
Quick Installation of iPrism
The proxy-mode configuration outlined in this guide provides an easy temporary setup for evaluating and testing iPrism
using proxied client traffic. Once you are familiar with using iPrism in Proxy-Mode, we recommend reconfiguring iPrism for
Transparent-Mode deployment to fully utilize the traffic management and reporting features.
For more information on installation and configuration (including transitioning to Transparent-Mode), see the iPrism
Installation Guide available on the iPrism support page at
Step 1. Record Setup Data for the iPrism Installation Wizard
1.1
iPrism License Key File
The iPrism license key file was emailed to the primary contact for your account.
Save it to your desktop prior to running the Install Wizard.
If you need to request your License Key file, go to
1.2
iPrism Model and Serial #
Record your iPrism Version and Serial Numbers for easy reference if you need to
call Technical Support.
1.3
iPrism Host Name
Assign a host name to the iPrism appliance. This name should reflect your DNS
domain.
1.4
DNS Server
The IP address of your Primary DNS (Domain Name System) Server. DNS is
required for name-resolution and email services. You can use multiple DNS
Servers. If you use Windows Active Directory specify those name servers here.
1.5
Assign an iPrism IP Address and Netmask
Specify an IP address and subnet mask for the iPrism to use that corresponds
with the network in which you are placing it. This will be required for appliance
discovery and later for Web-based iPrism administration.
1.6
iPrism Default Gateway
This is the device in your network that iPrism will use to connect to the Internet.
Most likely this will be the inside interface of your Firewall.
Step 2. Connect the iPrism and Log In
2.1
Connect a monitor and keyboard to the iPrism and log in as the user admin. At the menu, follow the instructions for
setting the IP address for iPrism, including the netmask and default gateway. Make sure these values are reachable
from the workstation you will use to perform the initial iPrism configuration.
https://www.edgewave.com/support/iprism-documentation/
http://keyrequest.edgewave.com
V8.x
Example: iprism.64641.key
The Install Wizard will prompt
you to upload this file.
iPrism Version:
iPrism Serial #:
Example: iprism.example.com
Your value:
Example: 192.168.45.30
Your value:
Example: 192.168.45.92 and
255.255.255.0
Your values:
Example: 192.168.45.1
Your value: