ClearWater CW13 Instrukcje instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje instalacji dla Produkt hydrauliczny ClearWater CW13. ClearWater CW13 2 stron. Overflow bath waste
Również dla ClearWater CW13: Instrukcje instalacji (2 strony)
Drukuj stronę
Installation Notes
• Please ensure that the air vent is installed in the correct position at the top of waste outlet.
• When temperatures fall below 0°C protect the product from frost.
• Use mains water only and particularly avoid salt water and/or water containing sand.
• Do not alter or modify the product in any way.
• The correct cleaning of the waste do not use products containing solvents, acid or alkaline
corrosive substances to clean the product, abrasive sponge and plugs with metallic thread,
because they could irreversibly alter the treated surfaces.
The MANUFACTURER disclaims any responsibility for use which fails to comply with the installation notes.
94°
85
75
49
66
80
129
NB: Air Vent must be positioned up as shown for
correct installation
25cm + - 1 cm
40cm + - 1 cm
+
25cm
1 cm
-
3° max
BEGIN OPEN
FULLY OPEN
Outlet
max 30 l/min
RECLOSED
Inlet
max 28 l/min