DIYtrade SF-LM17 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt dla DJ-ów DIYtrade SF-LM17. DIYtrade SF-LM17 8 stron. Moving head light 90w-120w led
Drukuj stronęAC100~230V/50~60Hz!
Always onsure during installation,operation, transport and when storing the product that the mains
cord is not exposed to possible mechanical damage, or damage caused by humidity,flulds,heat or
cold!
The products cable entry must not be exposed to stress from pull! Create the mains connection
once the product has been installed only .Always connect the mains plug last !
The producct must only be connected to a proper outlet of the public supply grid .Connect the
mains cord to suitable outlets only ! Use entensions cords in compliance with specifications only!
Do not allow the mains cord to come into contact with other cords!
Ensure during instaltation ,operation,transport and storage that none of the cables are freely
exsposed!
Never touch the mains cord ,mains plug and outlet with wet or damp hands !
When not using the product, and prfor to cleaning always disconnect the product from mains! To
do so, hold the mains plug by the handling surface and never pull the mains cord!
Never connect the device to dimmer packe!
3. Housing
Always ansure during installation,operation,transport and when storing the product that no shocks
or other forces impact the housing !
The housing must not touch onto any other devices or objects during operation!
Easily flammable materials,e.g. decoration material and other surfaces and objects,must maintain
a minimum distance of 3m to the housing !Walls must maintain a minimum distance of 50cm to the
housing!The device must be installed on a fireproof surface only (no carpet)1 Always ensure
aproper circulation of air.
Do not touch the housing during operation it will heat up .The housing is safe to touch approx .5
minutes following the end of operation!
The device must never be carried via the projector anns.Use the carring handles only !
Fluids must not enter the housing as this could reduce the protective insulation and may trigger
short cirouits which may lead to fatal electrio shocks !If flulds have entered, disconnect the mains
plug
immediately and secure the product against unintentional operation and contact yours
specialized dealer! Damage caused as a resuit of fluids entering the housing is exempt from
warranty .
No metal parts or other items must enter the housing as this may reduce the protective insulation
or trigger short circuits which may lead to fatal electric shocks !If metal parts or other items have
entered ,disconnect the mains plug immediately,secure the product against unintentional operation
and contact your specialized dealer!Damage caused by metal parts or other items in the housing is
exempt fromwarrantly.
4. Operating Environment
The
product
must
water ,rain,humidlty,fog may reduce the protective insulation which may lead to fatal electric
shocks!The limlt value for relactive humldity is 50% at 45 .A minimum distance of 1.5m to a fog
machine must be observed ;fog saturation in the room must not reduce the vislbllity to below 10m .
The product must be operated at a temperature range of between -5
product against direct exposure to sulight or other heat,such as from rediators! If the produc is
taken from a cold environment into a warm environment it must only be taken into operation once it
has reached ambient temperature,since the condensation created by the difference in temperature
DANGER OF LIFE！ RISKOF FIRE！
RISK OF SHORT CIRCUIT！
DANGER OF LIFE！ RISKOF FIRE！
RISK OF SHORT CIRCUIT！
be
operated
and
ATTENTION：
ATTENTION：
stored
in
a
dry
3/8
environment
only
and 45
only.Protect the
!Splash