EDgun EDMS Podręcznik - Strona 16

Przeglądaj online lub pobierz pdf Podręcznik dla Przyrządy pomiarowe EDgun EDMS. EDgun EDMS 16 stron. Digital measuring system

•

After installing the battery, the screen is tested (all pixels are turned on), and

then:

Where:

 HW: 2.3 (hardware) – version of the printed circuit board

 SW: 1.0 (software) – version of the software

Please pay attention

the printed circuit board from the shell of the gauge, if you touch the contacts, you

can short-circuit them, this does not lead to a breakdown of the pressure gauge, but

the controller may "hang up."

In this case, you either need:

1. Remove and insert the battery.

2. Or short circuit the two contacts of the comb for programming (shown in

red arrows).

Employees of "EDgun" company hope that our new product will be an excellent

tool for you in the knowledge of your weapons and will allow you to customize it

more carefully.

Thank you for the continued support of EDgun, customers are our most important

asset. – Eduard

HW:2.3

SW:1.0

, that when replacing the battery, you will need to remove