ALTRAN RM09-43L Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer ALTRAN RM09-43L. ALTRAN RM09-43L 10 stron.
Drukuj stronęCANCEL INTERMEDIATE
STOP POINT 1
CANCEL INTERMEDIATE
STOP POINT 2
CHANGE INTERMEDIATE POINTS 1&2
Old IP1/2
New IP1/2
Let the curtain move move to
new position IP1/IP2
TOUCH CONTROL FUNCTION
This curtain system has hand-start control function (touch control): the motor will be activated by gently pulling
the curtain.
This function is optional. You can use it or cancel it.
Operate touch control function (set as default)
Press [Stop] & [open] buttons for 4 s till the light
switches on, the motor will shake few times
Cancel touch control function
Stop the function
1.
Press [stop] and [close] buttons for 4 s till the light
switches on, the motor will shake few times.
ALTRAN SOLUTIONS SL
Ctra. Valencia-Ademuz, Km 21,9.
46181 · Benissanó · Valencia · SPAIN
Press [IP1], the curtain will
move to IP1 automatically
Press [IP1], the curtain will
move to IP2 automatically
(Reverso)
Press [Channel setting] y [IP1/2] to cancel
old IP1/IP2
Press [Stop] & [open] buttons for 4 s till the light
switches on, the motor will shake few times
Pres [channel setting] button on the back of
transmitter with a sharp tip in 3 s. The function is
(Reverso)
Press [Channel setting] and [IP1] to cancel
the intemediate stop point 1.
(Reverso)
Press [Channel setting] and [IP2] to cancel
the intemediate stop point 2
New IP1/2
Let the curtain move to new
position IP1/IP2. Refer to ins-
truction in the middle figure
(Back face)
Confirmation
2.
(Back face)
(Reverso)
cancelled.
Tel.: 00 34 96 113 61 53
Fax: 00 34 96 113 61 27
www.altransolutions.es
Old IP1/2
7