EDI EDV225MPC-2L-N1-VT Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Monitor EDI EDV225MPC-2L-N1-VT. EDI EDV225MPC-2L-N1-VT 2 stron.

To configure the display using the IR remote follow these instructions:

Enter the EDIT mode

1. To edit the top line, point the IR remote toward the center of the display. Press /

Hold the "TIME" button until the LED dot in the lower right corner of the least

significant digit flashes.

2. Press the "DEL" button to clear the display to "0"

3. Enter the desired preset numbers

4. Press the "OK" button to save

Enter the EDIT mode

1. To edit the bottom line, point the IR remote toward the center of the display.

Press / Hold the "SET" button until the LED dot in the lower right corner of the

least significant digit flashes.

2. Press the "DEL" button to clear the display to "0"

3. Enter the desired preset numbers

4. Press the "OK" button to save

1. Press "F2" on the remote. Top line will change to the current increment value set.

2. Press the "DEL" button to clear out the current increment value.

3. Input desired Increment value through the remote.

4. Press the "OK" button to save

Notes

• A photo-eye and reflective plate are provided with the sign. The reflective plate needs to be

installed in the direction the photo-eye is being pointed at. The photo-eye operates by

sending an infrared beam in the direction that it is being pointed. The plate will reflect the

IR beam back to the photo-eye thus incrementing the bottom line of the display. Each time

the beam is broken, the bottom line will increment by one.

• The power (PWR) button on the remote does not turn the display on or off.

________________________________________________________________________

Preset Top Line

Preset Bottom Line

Change Increment value (Bottom Line)

Please visit our website for more information:

www.electronicdisplays.com

Or Call: 1-800-367-6056

Or Our Support Website:

http://edisupport.helpserve.com/