Altrason Humidry BRF-120V Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Osuszacz powietrza Altrason Humidry BRF-120V. Altrason Humidry BRF-120V 13 stron. Ceiling mounted desiccant rotor multifunctional dehumidifier

(Continued on previous page)
・ Use the supplied M3.5 x 12mm self-tapping screws to
attach the Bottom Panel to the Bottom Cover.
M3.5 x 12mm
・ Insert the air filter.
Electrical Work
3
WARNING
HumiDry®
BRA-200V, BRB-200V, BRF-200V and BIF-200V:
Use only 200V AC power; use of other power
source may result in fire or electric shock.
BRA-220V, BRB-220V, BRF-220V and BIF-220V:
Use only 220V AC power; use of other power
source may result in fire or electric shock.
BRA-230V, BRB-230V, BRF-230V and BIF-230V:
Use only 230V AC power; use of other power
source may result in fire or electric shock.
BRA-240V, BRB-240V, BRF-240V and BIF-240V:
Use only 240V AC power; use of other power
source may result in fire or electric shock.
BRC-100V, BRF-100V, BIF-100V:
Use only 100V AC power; use of other power
source may result in fire or electric shock.
BRC-110V, BRF-110V, BIF-110V:
Use only 110V AC power; use of other power
sources may result in fire or electric shock.
BRC-120V, BRF-120V, BIF-120V:
Use only 120V AC power; use of other power
source may result in fire or electric shock.
Electrical and wiring work should follow national
standards and the governing rules for user premise
power line placement. Electrical and wiring work
should be conducted safely and reliably.
Power outlet
Set up a power outlet within 1.5 meters from the unit in
preparation. Install dedicated Earth Leakage Circuit
Breaker and ensure that the outlet complies with
required standards.
Attention: The actual power outlet may differ depending
on the country you live in. Please use the proper power
outlet that corresponds with your HumiDry unit.
110V North American
NEMA 5-15R
For Wall Panel version
Wall Panel Installation
4
Secure the wall mounting box the position you
wish to install your wall panel and run the RJ45
cable through (Use the supplied Wall Panel Mount
to help determine the size of the box you need)
Use the supplied M4x51mm self-tapping screw to
secure the Wall Panel Mount to the wall mounting
box (Make sure to not over-tighten the screws).
M4.0 x 51mm
・ Connect the RJ45 cable to the Wall Panel and
gently snap it against the Wall Panel Mount to
complete installation.
WARNING
Choose a location for secure installation.
Falling from insecure installation may
break the unit.
Do not place infrared receiver
near sharp objects.
May lead to electrocution or cause malfunction.
For Remote Control Version
Infrared Receiver Installation
5
Make sure that the RJ45 cable is securely connected
to the Infrared Receiver.
Find a desired location and use the appropriate
waterproof double-sided tape to secure the Infrared
Receiver onto the ceiling.
220V North American
NEMA 6-20R