EDI DEFLECTOMETER LMD301 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe EDI DEFLECTOMETER LMD301. EDI DEFLECTOMETER LMD301 14 stron.

Drukuj stronę
EDI DEFLECTOMETER LMD301 Instrukcja obsługi

4.5 LOOP INPUT (LIGHTNING PROTECTION)

The loop input incorporates lightning and transient protection devices and the loop
oscillator circuitry is transformer-isolated for each channel. The lightning protection will
withstand the discharge of a 10uF capacitor charged to 2,000V across the loop inputs or
between a loop input and Earth Ground. The transformer isolation allows operation with a
loop which is grounded at a single point.

4.6 RESPONSE TIMING

4.6.1 LMD301 AND LMD301T

Sensitivity Level
9
8
7
6
5

4.6.2 LMD301S (SOLID-STATE OUTPUTS)

Sensitivity Level
9
8
7
6
5

4.7 LMD301(T) CONNECTOR PIN ASSIGNMENTS

Pin
A
B
C
D
G
H
N.O. is Normally Open, N.C. is Normally Closed.
Relay Contacts are shown with power applied, loops connected and no vehicle present.
Connector mates with MS3106A-18-1S or equivalent.

4.8 LMD302(T) CONNECTOR PIN ASSIGNMENTS

Pin
Channel 1 Function
A
Neutral (AC-)
B
Ch 1 Output Relay Common (Emitter)
C
Power (AC+)
D
Channel 1 Loop Input
E
Channel 1 Loop Input
Eberle Design Inc.
LMD301, LMD302, and LMD304
Series Operations Manual
Response
32-49 ms
20-30 ms
17-26 ms
17-26 ms
17-26 ms
Response
25-38 ms
13-19 ms
11-16 ms
11-16 ms
11-16 ms
Function
Neutral (AC-)
Ch 1 Output Relay Common (Emitter)
Power (AC+)
Channel 1 Loop Input
E
Channel 1 Loop Input
F
Ch 1 Output Relay N.O. (Collector)
Ch 1 Output Relay N.C.
Earth Ground
I
No Connect
J
Ch 1 Timer Control (LMD301T)
Sensitivity Level
4
3
2
1
--
Sensitivity Level
4
3
2
1
--
Pin
Channel 2 Function
A
No Connect
B
Ch 2 Output Relay Common (Emitter)
C
No Connect
D
Channel 2 Loop Input
E
Channel 2 Loop Input
Response
17-26 ms
17-26 ms
17-26 ms
17-26 ms
--
Response
11-16 ms
11-16 ms
11-16 ms
11-16 ms
--
Page 10