ClearWater Lights Erica Instrukcja instalacji - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria motocyklowe ClearWater Lights Erica. ClearWater Lights Erica 16 stron. Kawasaki concours 1400 led light kit dimmable patent pending
Również dla ClearWater Lights Erica: Instrukcja instalacji (12 strony), Instrukcja instalacji (8 strony)
Drukuj stronę
Step 4: Wiring
Mounting The Control Knob: (Bar Mount)
• Mount the Volume Control Knob to handlebar by using supplied
bracket and bolt to the existing controls.
• Route wires from lights and volume control knob bracket to area
under left side of forks. Connections can be made here and be kept
weatherproof.
Wire Routing:
• Be sure to route wires so that they cannot become tangled or caught
in either a suspension part or steering part. Check movement of both
steering and suspension before riding the bike.
• It is sometimes helpful to follow existing wire routing.
The connector that connects
the harness to the lights may
need to be zip tied in a location
where it won't potentially rub on
the fork.
If no location is available to get
the wires out of the way it is
possible to stick a small plate
under the beak so that you
have a location to fasten the
wires to (shown in the photo to
the right).
Hint for High Vibration installations:
rotating itself under high vibration, put a dab of silicone adhesive under the knob
and let it dry. Then push the rubber knob back on. The friction of the glue under
the knob will keep it in place.
Page 12
(Please consult owners manual for wiring diagram and color codes)
To keep the Volume Control Knob from
Page 11