ClearWater Lights Glenda LED Light Kit Dimmable Instrukcja instalacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria motocyklowe ClearWater Lights Glenda LED Light Kit Dimmable. ClearWater Lights Glenda LED Light Kit Dimmable 12 stron. For bmw k1600gt
Drukuj stronęStep 5: Wiring (Overview)
the high beam is activated.
• Find a good solid ground point for the black wire terminal ring.
• Use a Posi-twist to connect the green wire from the volume control knob
to the two green wires from the lights (3 wires).
• Use a Posi-twist to connect red wire from the fuse holder to the red
wires from lights and volume control knob (4 wires)
• Connect ground/black wire to black wires from lights and volume control
knob. (4 wires)
• If you would like to use the high beam feature (recommended), use a
Posi-tap to connect the white wire from the volume control knob to the
High Beam headlight hot lead (+). This will be on only when the high
beam is illuminated.
(Wire Routing / Battery)
Tap Into
White Wire
White Wire
(Headlight Wiring)
Tap Into
Blue / White Stripe
Red Wire
(Wire Routing)
(Wire Routing)
Page 9