ClearWater Lights Krista Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria motocyklowe ClearWater Lights Krista. ClearWater Lights Krista 12 stron. Kawasaki concours 1400 led light kit dimmable patent pending
Również dla ClearWater Lights Krista: Instrukcja instalacji (16 strony), Instrukcja instalacji (8 strony)
Drukuj stronę
Step 5: Alignment / Drip Loop Instructions
Aligning The Lights:
As Erica, Krista, and Sevina are designed as auxiliary lights,
adjustment is up to the user depending on his or her needs. Ask an
assistant to help you with this procedure. Make sure the bike is on level
ground and have an assistant sit on the bike. Using a level, alight the
lights to be perpendicular to the ground. Another method would be to
position a large square on the floor and slide it up to the light. The goal is
to adjust the lights so that the light is level with the ground.
Passengers and luggage may alter the alignment of the light, so
further adjustments may be needed. You may find that a slight downward
angle (5 degrees at most) is helpful. Often times it is helpful to angle
the right side light toward the right side of the road. This helps with
identifying road terrain and potential critters.
Do Not Kink The
Grommet
To maintain the
integrity of the water
sealling grommet,
do not kink, deform
or put pressure on
the grommet when
dressing the wires
during install of
Clearwater Lights.
Page 8
Do Not Kink The Grommet
Page 7