3i BSE-150 Instrukcja instalacji - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System bezpieczeństwa 3i BSE-150. 3i BSE-150 8 stron. Active indoor and outdoor infrared barrier with 3 beams of protection
Drukuj stronęConnection terminals
1.
Not used
2.
Power input (+12Vd.c.)
3.
Negative power input
4.
Common (relay)
5.
Normally open
6.
Normally closed
7.
Tamper output
8.
Tamper output
Note: When the BST-100 is in normal function, the relay on the receiver is
always powered.
3 - Installation precautions
Outdoor installations: Due not install the
BST-100 where animals, trees, bushes
or other plants can interrupt the line of
sight of the barriers.
Indoor installations: Avoid that instable
objects intrupt the line of sight of the
barriers.
Avoid mounting the unit on columns that my not be
stable.
Avoid mounting the unit in direct sun light or
high luminosity light sources.
Avoid that a receiver can, by error, receive the signal transmitted form the
the wrong unit. See below:
Trasmitter
Receiver
ERROR
Instruction Manual BSE-150
Dry contact relay output only for receiver
Receiver
Receiver
Trasmitter
ENGLISH
Trasmitter
Trasmitter
CORRECT
Receiver
Pag. 3