AIMS Power PIC100012120S Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Falownik AIMS Power PIC100012120S. AIMS Power PIC100012120S 13 stron. Pure sine power inverter with charger & transfer switch
Drukuj stronę
Do not loosen or touch the rear set screws on the terminal block.
WARNING
The output voltage of this unit must never be connected in its input AC terminal, overload or
damage may result. Always press power button to ON position before plugging in any
appliance.
USING THE POWER INVERTER
1. Check the output voltage and capacity of the battery. The battery (s) should
match the voltage of the inverter and have enough capacity for the load. See
Section E for more information.
2. Connect your inverter to your battery bank and do not to reverse the polarities of
the connection. See Section F.
3. Press the power switch button on your inverter for .5 seconds and a green LED
will light up indicating that the inverter is on.
4. Before plugging anything into your inverter, make sure the appliance you are
trying to power is shut OFF, then plug it into the AC outlet of your inverter and
power on your appliance.
4. Once finished using the inverter, turn off your electrical appliance and the
inverter. The indicator lights should be off.