ClearWater Lights Glenda Instrukcja instalacji - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt oświetleniowy ClearWater Lights Glenda. ClearWater Lights Glenda 16 stron. Led light kit for bmw k1600gt
Również dla ClearWater Lights Glenda: Instrukcja instalacji (12 strony), Instrukcja instalacji (12 strony), Instrukcja instalacji (12 strony), Instrukcja instalacji (12 strony)
Drukuj stronęClearwater CANopener operation and features
DIMMING CONTROL (WonderWheel equipped bikes)
Two modulated brightness channels are adjustable using the
WonderWheel:
•
Each channel is programmable for ten brightness settings (10-
100%) in three different modes (day, night, and high beam). Settings
are stored in non-volatile memory, and will be remembered when
restarting the bike or disconnecting the battery. The dimmer is
programmed at the factory for the most useful day/night settings.
•
To enter dimmer program, you now must first press the Turn Signal
Cancel (TSC) switch once before tilting the Wonderwheel Left or
Right for dimming. Press the WonderWheel to the LEFT for two
seconds to engage the Darla/Glenda channel dimmer, or press it
to the RIGHT for two seconds to engage the Erica/Krista channel
dimmer. The lights being adjusted will flash twice to confirm
programming mode. Adjust the output by rotating the WonderWheel.
•
While adjusting the brightness mode, the second set of lights (if
installed) will automatically dim to their lowest setting in order to
easily observe the adjustment.
•
Exit programming mode either by waiting for approximately two
seconds or pressing the turn signal cancel button. The lights will
flash once to confirm.
•
Remember that each set of lights is adjustable for day, night and
high beam. Day and night settings are automatically selected by the
ambient light level reaching the bike's photocell. To adjust the night
dimmer, simply cover the photocell at the top right corner of the dash
display using your hand or a piece of tape. Activate the high beam to
adjust the high beam setting.
WARNING:
is not making adjustments to other functions of the onboard systems.
Turn off the entertainment system to prevent volume adjustment or
unwanted channel changes, and select the home screen on the GPS.
DIMMING CONTROL (non-WonderWheel bikes)
If the motorcycle does not have the GPS Prep Package
(WonderWheel), your light kit will come equipped with a handlebar
mounted analog/digital encoder knob for dimming control. Separate day
and night settings and the dual intensity dimmer will not be available.
ON/OFF FUNCTION FOR ERICA/KRISTA
The Erica/Krista lights can be manually deactivated. Toggle these
modes by holding the turn signal cancel button for two seconds.
•
Mode 1 – on and dimmable (default)
•
Mode 2 – off
When configuring the dimmer, be sure that the WonderWheel
Page 13