Altrocraft 241-9847 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piła Altrocraft 241-9847. Altrocraft 241-9847 9 stron. 6.0 amp

SPECIFICATIONS

Reciprocating Saw

Rated voltage: 120 volts, 60Hz



Current rating:

6.0 Amps



No load speed: 0-2700 SPM



Stroke length: 7/8 inch (22mm)



Includes:

1 wood cutting blade



1 hex key



1 set of spare carbon brushes



1. Blade

2. Pivot shoe

3. Quick-release blade clamp

On/off trigger switch

Lock-on button

BLADES

Your reciprocating saw is designed to accept Standard Reciprocating Saw

Blades. Note the the shape of the ends of the blades supplied with your tool.

Check to ensure that any blades you use on this saw are designed for the task.

WARNING: Before installing or removing saw blade, turn off the power switch

and disconnect the plug from the power source.

INSTALLING A SAW BLADE

1. Unplug the power cord first.

2. Rotate the Quick-release blade clamp (3) counterclockwise by hand

3. At the same time push the blade (1) to the deepest position, then release

the quick-release blade clamp, make sure it is securely fastened.

WARNING: Before you plug in the power cord, always pull on the blade

to ensure it is ﬁrmly held in the blade clamp. Failure to do so may result in

serious injury.

RUNNING THE RECIPROCATING SAW

NOTE: Always check that the power supply corresponds to the voltage on the rating

name plate.

SWITCH ON AND OFF

1. Connect the plug to the power supply.

Pull the trigger switch (4) and press the lock-on button (5).

When you release the trigger switch(4), the saw turns off.