Altron AL-761-N Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Altron AL-761-N. Altron AL-761-N 19 stron.

unit liquid inlet for any obstructions.

Check the strainer to ensure the tubing is under the liquid level.

③

Re-start again the Air drawing operation.

④

Caution:

In case the Electrolysis agent liquid tank is located higher than the

unit, the tank should be moved to a lower position than the unit.

OPERATIONAL STEPS:

How to produce strong electrolyzed water

Connect the grounding wire and connect the AC cable connect to the wall

●

power outlet and turn on power switch located backside.

Warning:

Make sure the grounding wire is correctly secured

otherwise there is a possibility of an electrical shock

hazard.

Do not handle the AC cable with wet hands otherwise

there is a possibility of an electrical shock hazard.

After the Power is turned on a display will appear as

Turn the diverter position horizontal then turn on tap water. ● Conduct the air drawing

operation. (Refer to air drawing operation on the previous page.)

Continuance Mode

・Press Continuance Mode button or remote switch

(option). Process lamp will turn on and start strong

electrolysis processing.

. Press again the Continuance Mode button or remote

switch (option) for process stop.

Timer Mode

・Please set your required process value by value

button▲▼. (minimum of 0.5 liter, maximum of 60

liters)

・Press Timer Mode button. Process lamp will turn on and start strong electrolysis

processing.