AKKTOL BT-607 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Narzędzia AKKTOL BT-607. AKKTOL BT-607 14 stron. Rivet nut tool

How to Change The Mandrel ?

Before using the riveter, you need to check the information in the rivet nut chart and

the thickness of your workpiece to ensure that the riveting range of the rivet nut covers

the thickness of your workpiece. Choose the right mandrel for the rivet nut you are using.

Note: The M8 mandrel is already installed on the tool, so the small box of M8 is empty.

Warning: The thickness of the workpiece should be within the riveting range of the rivet nut,

otherwise it may lead to smaller mandrels snapping, stripping, or riveting failure.

1. Unscrew the nosepiece counterclockwise, either by hand or with the provided wrench

if it is too tight to do so. Always keep the matched mandrel and nosepiece sets together.

2. Using your thumbnail or a tool, press down to depress the inner hexagonal sleeve

that sits within the outer sleeve. This should expose the lower hex portion of the mandrel.

Then, unscrew the mandrel and remove it.

Sliding Sleeve