dji 3WWDSZ-10017 Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drony dji 3WWDSZ-10017. dji 3WWDSZ-10017 12 stron.

landing gear, power port module, spray tank, sprinklers and radar module. Ensure threadlocker is

totally dry and solid before flight.

● DO NOT bend the hose in an arc tighter than its minimum bend radius during installation. This is to

avoid creasing, which may compromise the spraying effect.

● Ensure that all installation and connection procedures are completed before powering on the

aircraft.

Mounting the Battery

Insert the battery into the battery compartment from the front of the aircraft. Ensure the battery is

securelymounted and then buckle the belt to the button of the spray tank.

Belt

● TheMG-1P/ MG-1P RTK does not come with a battery. Please purchase the DJI approved MG-1S

battery pack (Model: MG-12000P).

● The voltage on the aircraft can reach 50.4 V. Read the battery's safety guidelines and take

necessary precautions when handling the battery to ensure your own safety.

Fly Safe

It is important to understand some basic flight guidelines, both for your protection and for the safety of

thosearound you.

1. Flying in Open Areas: Do not fly near or above people or animals, or near buildings, power lines

and other obstacles.

2. Maintain Control at All Times: Always keep your hands on the remote controller and maintain

control of your aircraft when it is in flight, even when using intelligent functions such as Intelligent

Operating Planning System, Smart Operation Mode and Smart Return-to-Home.

3. Maintain Line of Sight: Maintain a line of sight to your aircraft at all times and avoid flying behind

buildings or other obstacles that may block your view.

Power Port

Button