AIMS Power PWRIC150012W Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Falownik AIMS Power PWRIC150012W. AIMS Power PWRIC150012W 10 stron. Dc to ac power inverter

AIMS Power PWRIC150012W Instrukcja obsługi
supplied AC input during bypass mode.
Warnings
Unplug the inverter when it is not in use.
If the AC inverter makes a beeping sound, turn off the equipment, unplug the inverter and
restart the vehicle's engine. The beeping sound is simply the low-battery warning, which
indicates that the voltage of your battery is getting low. If you do not re-start your engine
and continue operating the inverter, the inverter will automatically shut off, leaving your vehicle's
battery at about 10. 5 VDC. This will allow you to start your engine and resume operation of the
inverter. It also reduces the fear of being stranded with a dead battery (dependent on health of
battery).
This device should only be serviced by a qualified technician. This item does not have any
serviceable parts.
Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and
refrigerator enclosures during installation.
Do not operate the inverter if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If
there is any doubt, do not operate the inverter.
People with pacemakers should consult their physician(s) before using this product.
Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or
failure of the pacemaker.
Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
Store idle equipment. When not in use, inverter must be stored in a dry location to prevent
rust. Always lock up tools and the inverter and keep out of reach of children.
Size the inverter properly. Size the inverter for the surge rating of your equipment. The
inverter's continuous rating should be MORE than the surge rating of your equipment.
Example: Power tool runs at 1500 watts but surges at 2500 watts. You should use an inverter
>3000 watts.
Keep the inverter well-ventilated. Do not place any objects on top of or next to the inverter
or allow anything to cover the cooling fans; doing so can cause the inverter to overheat,
causing a potential fire hazard and/or damage to the inverter. Leave adequate ventilation
space underneath the inverter as well; thick carpets or rugs can obstruct air flow, causing the
inverter to overheat.
Avoid unintentional starting. Be sure the switch is in the OFF position when not in use and
before plugging in any appliance.
Note: Performance of this unit may vary depending on the available battery power or appliance