dji Inspire 1 V1.2 Quick Start Quide - Strona 3

Przeglądaj online lub pobierz pdf Quick Start Quide dla Drony dji Inspire 1 V1.2. dji Inspire 1 V1.2 10 stron.

Remote Controller

The maximum transmission distance of the Inspire 1 remote controller is 2km*. The remote controller also allows you to

control the landing gear or activate Return to Home with a tap. Other buttons allow instant photo capture, video recording,

picture review and gimbal control.

A DJI Lightbridge-based HD video downlink is built-in, letting you see what your camera sees on your mobile device in

real time HD. The app also allows you to change camera settings and activate Master/Slave mode so that one person can

fly while other controls the gimbal independently. The master and slave controllers communicate using a 5.8Ghz wireless

signal, and have a communication range with each other of up to 50 meters.The controller's LiPo battery has a maximum

run time of approximately four hours and can be charged by plugging directly into the controller.

Folded

11. Gimbal Dial

12. Camera Settings Dial

13. Video Recording Button

14. Flight Mode Switch

15. Shutter Button

16. Playback Button

17. Mini-HDMI Port

18. Micro-USB Port

19. CAN-Bus Port

20. USB Port

21. Back Buttons (Reserved)

17 18 19

* Please note that the max transmission distance were tested in a lab environment. This statistic is for reference only, as conditions in your

area may vary.

Connect to the

mobile device

1. Power Button

2. Transformation Switch

3. Return to Home (RTH) Button

4. Control Sticks

5. Status LED

6. Battery Level LEDs

7. Power Port

8. Mobile Device Holder

9. Antennas

10. Handle Bar